Eaton DG325FRK
EATON DG325FRK K Series Cartridge Fusible General Duty Safety Switch, 240 VAC, 400 A, 50 hp, 125 hp, TPST Contact, 3 Poles
IEC Disconnects and Load Switches
4365139
DG325FRK
Eaton
$0.00
/ ea
- Amperage Rating: 400
- Contact Form: TPST
- Dimensions: 12.63 x 23 x 45.19
- Enclosure Type: NEMA 3R
- Finish: Galvanized/Painted
- Horsepower: 50 hp, 125 hp
- Material: Steel
- Number of Poles: 3
- Number Of Wires: 3
- Phase: 3
- Series: K Series
- Type: Cartridge Fusible General Duty
- Voltage Rating: 240
Eaton General duty cartridge fuse safety switch, 400 A, NEMA 3R, Painted galvanized steel, Class H fuses, Fusible without neutral, Three-pole, Three-wire, Category: general duty safety switch, 240 V
- Features
- Suitable for service entrance applications unless otherwise noted
- Fusible and non-fusible switches are 100% load break and 100% load make rated
- The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits, non-fusible switches are 100% fully rated
- With class r fuses, switches may be used on systems capable of delivering 100000 A RMS symmetrical
- Bolt-on hub provision, provided for general duty switches in a NEMA 3R enclosure
- Maximum hp ratings apply only when dual element fuses are used, 3-phases hp rating shown is a grounded B phase rating
- Warning switch is not approved for service entrance unless a neutral kit is installed
- Without neutral