Eaton DH221FGK
EATON DH221FGK K Series Fusible Heavy Duty Single Throw Safety Switch, 240 VAC, 30 A, 1-3/4 hp, 5 hp, DPST Contact, 2 Poles
IEC Disconnects and Load Switches
566894
DH221FGK
Eaton
$0.00
/ ea
- Amperage Rating: 30
- Contact Form: DPST
- Dimensions: 18 in L x 9-1/2 in W x 7-1/2 in H
- Enclosure Type: NEMA 1
- Finish: Painted
- Horsepower: 1-3/4 hp, 5 hp
- Insulation Type: Class H
- Material: Steel
- Number of Poles: 2
- Number Of Wires: 2
- Phase: 1
- Series: K Series
- Short Circuit Current Rating: 100
- Type: Fusible Heavy Duty Single Throw
- Voltage Rating: 240
Eaton Heavy duty single-throw fused safety switch, Enhanced visible blade, 30 A, NEMA 1, Painted steel, Class H, Fusible without neutral, Two-pole, Two-wire, 240 V, Max Hp: 1.5, 5 hp (1PH @240V/250 Vdc), #14-#2 Cu/Al
- Features
- Clearly visible palm fitting red handle allows users to easily see the handle position (On/Off) from a distance and provides for easy operation
- Visible double break rotary blade mechanism offers 2-points of contact for a positive open and close, easier operation and to help prevent contact burning for longer contact life
- Triple padlocking capability increases personnel safety
- Interlocking mechanism keeps the door closed when the handle is in the ON position to maximize safety, although there is a built-in defeater mechanism for user access when necessary
- Clear line shield protects against accidental contact with energized parts and the probe holes enable the user to test if the line side is energized without removing the shield
- Complete accessory and renewal parts data shown on inner door label
- Meets stringent UL 98 standards for safety, durability and reliability
- Accepts class h fuses
- Enhanced visible blades
- Without neutral fuse configuration
- 1-3/4 hp at 240 VAC standard 1-phase, 5 hp at 250 VDC maximum hp rating