Eaton Crouse-Hinds EBMBB FD W60360
Crouse-Hinds EBMBB FD W60360 Heavy Duty Non-Fusible Disconnect Switch, 200 to 600 VAC/ 250 VDC, 60 A, 60 hp
NEMA Disconnect Switches
7367712
EBMBB FD W60360
Eaton Crouse-Hinds
$0.00
/ ea
- actuator type: Handle
- Amperage Rating: 60
- Dimensions: 14.46 in W x 10.25 in D x 26.9 in H
- Enclosure Type: NEMA 3/3R/4/4X/7/9/12
- Finish: Natural
- Horsepower: 60
- Material: Copper-Free Aluminum
- Mounting Type: Foot
- Series: EBM
- Type: Heavy Duty Non-Fusible
- Voltage Rating: 200 to 600 VAC/ 250 VDC
Eaton Crouse-Hinds series EBM disconnect switch, 60A, With switch, Non-fused, 7.5 HP/20 HP/40 HP/60 HP, Copper-free aluminum, Polyphase, 200-600 Vac/250 Vdc
- Features
- Rugged corrosion-resistant cast copper-free aluminum construction
- Switch operating handle is located through the right side wall of the body, permits visual confirmation of correct alignment and operation
- Total compliance to the wiring end room requirements of the National electrical Code®
- Semi clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Stainless steel hinges allow the cover to swing well out of the way
- Stainless steel quick release captive hex head cover bolts, stainless steel springs provide clear indication that cover bolts are fully retracted from the body
- Switch operating handle can be padlocked in either the ON or OFF position
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Bodies have top and bottom drilled and tapped conduit entrances for power and conduits removable reducers are supplied as standard, to accommodate smaller size conduits all conduit entrances are plugged
- Tap on mounting feet