Eaton Crouse-Hinds EDS2184

Crouse-Hinds FlexStation™ EDS2184 1-Gang Combination Dead End Factory Sealed Heavy Duty Pushbutton Control Station, 600 VAC, 20 A, 1NC-1NO Contact, 3/7B/7C/7D/9E/9F/9G NEMA Rating
NEMA Pushbuttons - 30.5mm
4234017 EDS2184
Eaton Crouse-Hinds
$0.00 / ea

Eaton Crouse-Hinds EDS2184
  • Amperage Rating: 20
  • Contact Configuration: 1NC-1NO
  • Dimensions: 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
  • Finish: Natural
  • Material: Feraloy® Iron Alloy
  • Nema Rating: 3/7B/7C/7D/9E/9F/9G
  • Number of Poles: 2
  • Operator Type: Front
  • Series: EDS
  • Type: 1-Gang Combination Dead End Factory Sealed Heavy Duty
  • Voltage Rating: 600
Eaton Crouse-Hinds series EDS pushbutton control station, With pushbuttons, Feraloy iron alloy, Single circuit universal, 1, Single-gang, 1, Dead end, 3/4",
QTY
Add to Wishlist
  • Features
  • Factory sealed enclosures are used to prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure, in conjunction with magnetic starters or contactors for remote control of motors
  • Reduce installation problem
  • Eliminate external seals
  • Lower installation cost
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • When stop is indicated, button is automatically red, when start is indicated, button is automatically green, otherwise, black buttons are standard
  • Explosionproof, dust ignitionproof, raintight
  • 3/4 in hub
  • One circuit universal
  • Fully assembled
  • For use with EDS/EFS series control stations