Eaton Crouse-Hinds EDSC21272
Crouse-Hinds FlexStation™ EDSC21272 1-Gang Factory Sealed Heavy Duty Through-Feed Selector Switch Control Station, 600 VAC, 4NO-4NC Contact, 1 Operator, 3/7B/7C/7D/9E/9F/9G NEMA Rating
NEMA Pushbuttons - 30.5mm
7462369
EDSC21272
Eaton Crouse-Hinds
$0.00
/ ea
- Actuator: Lever
- Connection Type: Screw
- Contact Configuration: 4NO-4NC
- Contact Mode: Maintained
- Dimensions: 5-7/8 in L x 3-1/2 in W x 2-11/16 in H
- Finish: Natural
- Material: Feraloy® Iron Alloy
- Mounting Type: Surface
- Nema Rating: 3/7B/7C/7D/9E/9F/9G
- Number of Operators: 1
- Series: EDS
- Type: 1-Gang Factory Sealed Heavy Duty Through-Feed
- Voltage Rating: 600
Eaton Crouse-Hinds series EDS selector switch control station, With selector switch, With two 3/4" hubs, Feraloy iron alloy, Two-position, four-circuit, 4, 1, Single-gang, 2, Through feed, 3/4", 600 Vac
- Features
- Reduce installation problem
- Eliminate external seals
- Lower installation cost
- Improve safety
- Are used with general purpose snap and pushbutton type switches
- Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
- Mounting lugs and taper tapped hubs with integral bushing
- Large machine screws for fastening covers to bodies
- Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
- Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
- Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
- On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
- Explosionproof, dust ignitionproof, raintight
- 3/4 in hub
- Two position, four-circuit