Eaton S801+T24N3S

EATON S801+T24N3S Non-Combination Standard Severe Duty T-Frame Soft Starter, 21.6/26.4 VAC V Coil, 3 Poles, NEMA 0/IP20 Enclosure
NEMA Contactors and Starters
7366654 S801+T24N3S
Eaton
$0.00 / ea

Eaton S801+T24N3S
  • Amperage Rating: 240
  • Coil Voltage: 21.6/26.4
  • Connection Type: Lug
  • Dimensions: 6.47 x 7.65 x 11.77
  • Enclosure Type: NEMA 0/IP20
  • Frequency Rating: 47 to 63
  • Motor Power: 150 hp, 200 hp
  • Number of Poles: 3
  • Operating Temperature: -30 to 50
  • Overload Relay: Solid State
  • Phase: 3
  • Series: S801
  • Starting Modes: Current Limit/Ramp
  • Timing: 0.5 to 18
  • Type: Non-Combination Standard Severe Duty T-Frame
  • Voltage Rating: 200 to 600
  • Wattage: 147
Eaton S801+ soft starter, 240 A, T-frame, Three-pole, 24 V power, 200-600 V, 47-63 Hz, 1-2 conductors, #4 AWG to 500 kcmil wire, 120 Vdc, 240 Vac, CIM, Used with: Three-phase motors, Modbus RTU, NEMA 0, LCD display, -30пїЅC to -50пїЅC
QTY
Add to Wishlist
  • Features
  • Built-in overload protection, run bypass contactor
  • Adjustable ramp times, torque control, kick start control
  • Programmable overload settings, 31 to 100% (3.2:1) of rated current for the unit
  • Physically fits in place of most NEMA and IEC starters
  • Easy to use control interface module, 6 SCRs control
  • Reduced wear on belts, gears, chains, clutches, shafts and bearings
  • Allows for controlling the inrush current to the motor
  • Reduced inrush current leads to more stable power grid and can lower peak demand charges
  • Elimination of water hammer in pumping applications
  • Less shock to product on conveyor lines and material handling gear
  • 24 VDC control module enhances personnel and equipment safety