nVent Hoffman VHD36
Hoffman SYSPEND™ VHD36 VM2 Type 4 Heavy Duty Machine Top Mount VHD Motion Arm, For Use With SYSPEND™ HMI Enclosures, 25 to 75 lb Load Capacity, Steel, Light Gray
Operator Interface Systems
7007045
VHD36
nVent Hoffman
$0.00
/ ea
- Color: Light Gray
- Dimensions: 10.18 in H x 40.65 in W x 4.86 in D
- Material: Steel
- Series: VM2
- Specifications: 25 to 75 lb Load Capacity
- Suitable For Use With: SYSPEND™ HMI Enclosures
- Type: Type 4 Heavy Duty Machine Top Mount
Hoffman SYSPEND VHD Motion Arm, Type 4 Heavy Duty Machine Top Mount, Series: VM2, For Use With: SYSPEND HMI Enclosures, Specifications: 25 to 75 lb Load Capacity, Steel, Light Gray, 10.18 in H x 40.65 in W x 4.86 in D Dimensions
- Features
- Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb
- No release handle is required to operate the arm
- Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
- 26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
- Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
- Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
- Tension adjustment at front of the arm provides additional fine tuning of lifting force
- No locking enclosure handle required, enclosure stays in place after repositioning
- Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
- 1.3 in internal cable pathway maintains NEMA type 4 and 12 enclosure rating and protects wires and cables
- Gasketed mounting surfaces at both ends of arm maintain seal integrity
- Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments
- Standard models are available with machine top mounting
- RAL 7035 light gray finish with black end supports