Appleton EDS2184

Appleton Contender EDS2184 1-Gang 1-Circuit Dead End Pushbutton Control Station, 600 VAC, 10 A, 1NC-1NO Contact, 1 Operators, NEMA 3/7CD/9EFG NEMA Rating
Hinge Switches
6859869 EDS2184
Appleton
$0.00 / ea

Appleton EDS2184
  • Amperage Rating: 10
  • Connection Type: Thread
  • Contact Configuration: 1NC-1NO
  • Contact Mode: Momentary
  • Dimensions: 6.81 in H x 3.06 in W x 3.72 in D
  • Finish: Triple Coated
  • Legend: Start/Stop
  • Material: Malleable Iron
  • Mounting Type: Surface
  • Nema Rating: NEMA 3/7CD/9EFG
  • Number of Operators: 1
  • Operator Type: Front Button
  • Series: EDS
  • Type: 1-Gang 1-Circuit Dead End
  • Voltage Rating: 600
Contender EDS Series 1-Gang 1 Circuit Push Button Switch, Action: Momentary, Contact Configuration: 1 NO/1 NC, Contact Rating: 10 AMP At 600 VAC, Actuator: Front Operated, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 3/4 IN
QTY
Add to Wishlist
  • Features
  • Finish is epoxy powder coat for enhanced corrosion resistance
  • Large back box for ample wiring room
  • Ground screw installed in bodies for ground continuity
  • Corrosion resistant stainless steel hexagonal head captive screws hold covers to body
  • Factory sealed enclosure eliminates need for adding sealing fittings and compound at each conduit entrance
  • Factory sealed pilot lights supplied with jewel/guard assembly and 120 VAC/VDC, 50/60 Hz, 6 W lamp (LED provided as option)
  • Dozens of possible combinations of push buttons, pilot lights and selector switches
  • Accurately tapped, tapered hubs for tight rigid joints and ground continuity
  • Stainless steel pushbutton shaft operates within stainless steel bushing assuring long, maintenance free operation
  • Smooth, rounded integral bushing in each hub protects conductor insulation
  • Pushbutton and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements
  • Assures positive contact and long, trouble free operation
  • Enclosed stainless steel helper spring prevents accidental operation of pushbutton in severe vibration installations
  • All momentary push buttons are supplied with lockout type guards as standard
  • Hole in guard will accept locks with up to 1/4 in hasp
  • Permits locking of pushbutton to prevent unauthorized operation
  • Clearly marked terminals with brass screws and spade terminals assure quick, easy wiring