Appleton N1D75-F3W
Appleton Intraground N1D75-F3W 1-Gang Dead-End Tumbler Switch Control Station, NEMA 3/4X/7C/7D/12
Hinge Switches
7565567
N1D75-F3W
Appleton
$0.00
/ ea
- Actuator: Front Operated Lever
- Connection Type: 1/2 or 3/4 in Hub
- Contact Mode: 3-Way
- Contact Rating: 20 A at 120 to 277 VAC
- Dimensions: 4.5 in W x 5.63 in D x 6.19 in H
- Material: 30% Glass Reinforced Thermoplastic Polyetherimide
- Nema Rating: NEMA 3/4X/7C/7D/12
- Series: N1 Series
- Type: 1-Gang Dead-End
Appleton Intraground Tumbler Switch Control Station, 1-Gang Dead-End, Series: N1 Series, 3-Way Contact Mode, 20 A at 120 to 277 VAC Contact, Front Operated Lever, 1/2 or 3/4 in Hub, NEMA 3/4X/7C/7D/12, 30% Glass Reinforced Thermoplastic Polyetherimide, 4.5 in W x 5.63 in D x 6.19 in H
- Features
- Excellent heat deflection temperature sample specimens rated at 410 deg F
- Non-metallic construction with metal imbedded grounding grid
- No need to install special wires and parts for grounding
- Dead-end grounded 1/2 or 3/4 in conduit openings for threaded conduit
- Special grounding wire furnished with each box provides safe grounding when cover is removed
- Non-metallic enclosures with corrosion resistant parts coated with epoxy, PTFE or Mylar™, these control stations offer unsurpassed resistance to chemicals
- Silicone gasket, specially designed for the labyrinth-path point between cover and body, prevents entrance of moisture and dust
- Smooth rounded integral bushing in each conduit opening protects conduct or insulation
- Accurately tapped, tapered conduit openings for tight, rigid joints and ground continuity
- Designed with unique labyrinth-path construction to assure a flame-tight joint between body and cover
- Explosionproof, raintight, watertight with sealing fittings field installed adjacent to enclosure on all conduit runs, the N1 series enclosures withstood a hydrostatic test
- Typical mechanical properties of 24500 psi tensile strength, 3% elongation at break, 33000 psi flexural strength and 1200000 psi flexural modulus
- Electrical properties of sample specimens dielectric strength (in air) of 769 at 1/16 in
- Designed with high strength thermoplastic polyetherimide, together with thick walls (5/16 in) and sound structural design (rounded corners) provides superior resistance to impact and crushing
- The N1 Series provides excellent resistance to ultraviolet light
- Operating handle has close-tolerance threaded stainless steel shaft to meet explosionproof requirements
- Provides positive corrosion resistant operation
- Handle may be locked in ON/OFF position
- Enclosures have external mounting lugs for ease of mounting
- Nylon 6/6 actuator