Eaton E50AS36P12

EATON E50AS36P12 6P+ Assembled Factory Sealed Heavy Duty Plug-In Limit Switch, Side Push Roller Actuator, 1NO-1NC Contact, 1 Pole
Limit Switches
7396875 E50AS36P12
Eaton
$0.00 / ea

  • Action: Spring Return
  • Actuator: Side Push Roller
  • Connection Type: 12 ft Cable
  • Contact Configuration: 1NO-1NC
  • Contact Rating: 10 A at 240 VAC, 1 A at 250 VDC
  • Enclosure Type: NEMA 1/3/3S/4/4X/6/6P/13/IP67/IP69K
  • Material: Die Cast Zinc
  • Number of Poles: 1
  • Operating Cycles: 8000
  • Operating Temperature: 14 to 201
  • Series: E50
  • Size: 1.54 in L x 2.94 in W x 4.67 in H
  • Type: 6P+ Assembled Factory Sealed Heavy Duty Plug-In
Eaton E50 Heavy Duty Factory Sealed 6P+ Limit Switch,Within 0.003,12 Ft. ( 3.7m ) Cable,10A at 240Vac,1A at 250Vdc,SOOW-A,1NO-1NC,144ft,Die Cast Zinc,NEMA 1,3,3S,4,4X,6,6P,13,IP67,IP69K,10A,1A,14пїЅto201пїЅF,Side Push Roller
  • Features
  • Modular, plug-in components (head, body and receptacle) provide application flexibility, reduced inventory and less downtime
  • Manufactured to take the physical and environmental abuse (including cutting fluids and chemicals) of harsh industrial environment
  • Chemical-resistant FKM gaskets, seals and boots are standard and so are captive, posi-drive screws
  • FKM switch gasket
  • A special tertiary seal on the switch body prevents fluid from entering even when the operating head is not attached
  • 600 VAC rating ridge topped contact and wiping action assure continuity even to logic level circuits
  • Factory wired cable features a 350 lb pullout capacity
  • Keyed, four direction head positioning
  • Standard 5 deg pre-travel and 90 deg total travel
  • Within 0.0012 in repeat accuracy
  • 1/2 in NPT or 20 mm threading conduit entrance
  • Snap action over center mechanism contact operation
  • Fine silver contact
  • 1000000 hr operations typical at full load electrical life
  • Standard limit switch
  • 12 ft connection cable
  • Without indicating light