Eaton E50AT36P
EATON E50AT36P 6P+ Assembled Factory Sealed Heavy Duty Plug-In Limit Switch, Top Push Roller Actuator, 1NO-1NC Contact, 1 Pole
Limit Switches
6776918
E50AT36P
Eaton
$0.00
/ ea
- Action: Spring Return
- Actuator: Top Push Roller
- Connection Type: 8 ft Cable
- Contact Configuration: 1NO-1NC
- Contact Rating: 10 A at 240 VAC, 1 A at 250 VDC
- Enclosure Type: NEMA 1/3/3S/4/4X/6/6P/13/IP67/IP69K
- Material: Die Cast Zinc
- Number of Poles: 1
- Operating Cycles: 8000
- Operating Temperature: 14 to 221
- Series: E50
- Size: 1.54 in L x 1.58 in W x 5.46 in H
- Type: 6P+ Assembled Factory Sealed Heavy Duty Plug-In
Eaton E50 NEMA heavy duty plug-in limit swtch, Factry Seald 6P+,Wthn 0.002,8 Ft. ( 2.5m )Cable,10A at 240Vac,1A at 250Vdc,SOOW-A,1NO-1NC,96ft,Die Cast Zinc,NEMA 1,3,3S,4,4X,6,6P,13,IP67,IP69K,10A,1A,14 to221F (-10 to105C),Top Push Roller
- Features
- Modular, plug-in components (head, body and receptacle) provide application flexibility, reduced inventory and less downtime
- Manufactured to take the physical and environmental abuse (including cutting fluids and chemicals) of harsh industrial environment
- Chemical-resistant FKM gaskets, seals and boots are standard and so are captive, posi-drive screws
- FKM switch gasket
- A special tertiary seal on the switch body prevents fluid from entering even when the operating head is not attached
- 600 VAC rating ridge topped contact and wiping action assure continuity even to logic level circuits
- Factory wired cable features a 350 lb pullout capacity
- Keyed, four direction head positioning
- Standard 5 deg pre-travel and 90 deg total travel
- Within 0.0003 in repeat accuracy
- 1/2 in NPT or 20 mm threading conduit entrance
- Snap action over center mechanism contact operation
- Fine silver contact
- 1000000 hr operations typical at full load electrical life
- Standard limit switch
- 8 ft cable
- Without indicating light