Eaton 13150AL04

EATON Prism reg; 13150AL04 3/4-Wire Forward Viewing Photoelectric Sensor, Tubular Shape, 8 in, Red Laser Sensing Beam, 3 ms Response, Solid State Relay Output
Photoelectric and Laser
402619 13150AL04
Eaton
$0.00 / ea

Eaton 13150AL04
  • Amperage Rating: 80/110
  • Connection Type: 4-Pin Dual Key Micro
  • Enclosure Type: NEMA 1/2/3/4/4X/6/12/13
  • Frequency Rating: 50/60
  • Light Source: LED
  • Mounting Type: Surface
  • Operating Temperature: -13 to 131
  • Output Type: Solid State Relay
  • Response Time: 3
  • Sensing Beam: Red Laser
  • Sensing Method: Diffuse Reflective
  • Sensing Range: 8
  • Shape: Tubular
  • Size: 2.35 in L x 0.47 in W x 2.35 in H
  • Type: 3/4-Wire Forward Viewing
  • Vibration: 30 g Over 10 Hz to 2 kHz
  • Voltage Rating: 20 to 132 VAC, 15 to 30 VDC
  • Wattage: 1.5
Eaton OEM Prism 18mm tubular photoelectric sensor, Diffuse Reflective, Forward Viewing, Output ON, Dual key micro, 80 mA AC/100 mA DC at 20-132V, 4 pin, Isolated SSR, 20-132 Vac 50/60 Hz, 15-30 Vdc
QTY
Add to Wishlist
  • Features
  • Small size for use in a wide variety of applications and locations
  • High sensing power for longer ranges and resistance to dust and dirt
  • Adjustable gain control to ensure peak optical performance
  • High noise immunity which greatly reduces problems associated with electrical noise
  • AC/DC models which allow you to order and stock one model for both voltages
  • Isolated outputs for wiring flexibility
  • Short circuit protection is provided by an adjustable instantaneous only
  • Highly visible output status LED
  • Structural polyurethane foam body, PVC cable and polycarbonate lens
  • 400 VAC maximum output isolation
  • 200 VAC peak/180 VDC voltage switching capacity
  • 10 uA maximum off-state leakage
  • 25 Ohm maximum ON-state resistance
  • Light steady when output is on
  • 80 mA AC load, 110 mA at 132 VDC (derate to 100 mA at 180 VDC) current switching capacity