Eaton 13150AL07
EATON Prism reg; 13150AL07 3/4-Wire Forward Viewing Photoelectric Sensor, Tubular Shape, 8 in, Red Laser Sensing Beam, 3 ms Response, Solid State Relay Output
Photoelectric and Laser
6814609
13150AL07
Eaton
$0.00
/ ea
- Amperage Rating: 110
- Connection Type: 4-Pin M12
- Enclosure Type: NEMA 1/3/4/4X/6/6P/12/13
- Frequency Rating: 50/60
- Light Source: LED
- Mounting Type: Surface
- Operating Temperature: -13 to 131
- Output Type: Solid State Relay
- Response Time: 3
- Sensing Beam: Red Laser
- Sensing Method: Diffuse Reflective
- Sensing Range: 8
- Shape: Tubular
- Size: 0.47 in L x 0.71 in W x 2.35 in H
- Type: 3/4-Wire Forward Viewing
- Vibration: 30 g Over 10 Hz to 2 kHz
- Voltage Rating: 10 to 30
- Wattage: 1
Eaton OEM Prism 18mm tubular photoelectric sensor, Forward Viewing, Sensor distance: 8 In., Iso SS Relay, 80 mA at 132 Vac/110 mA at 132Vdc, 4 Pin M12 Connector, 10-30 Vdc input, Current Limited for loads >32V AC/DC, Diffuse Reflective
- Features
- Small size for use in a wide variety of applications and locations
- High sensing power for longer ranges and resistance to dust and dirt
- Adjustable gain control to ensure peak optical performance
- High noise immunity which greatly reduces problems associated with electrical noise
- DC only models which offer lower cost options in all sensing modes
- Isolated outputs for wiring flexibility
- Short circuit protection is provided by an adjustable instantaneous only
- Highly visible output status LED
- Structural polyurethane foam body, PVC cable and polycarbonate lens
- 400 VAC maximum output isolation
- 200 VAC peak/180 VDC voltage switching capacity
- 10 uA maximum off-state leakage
- 25 Ohm maximum ON-state resistance
- Light steady when output is on
- 80 mA AC load, 110 mA at 132 VDC (derate to 100 mA at 180 VDC) current switching capacity