Eaton 14150RD04
EATON Prism reg; 14150RD04 3/4-Wire Photoelectric Sensor, Tubular Shape, 15 ft, Red Laser Sensing Beam, 3 ms Response, Solid State Relay Output
Photoelectric and Laser
4356631
14150RD04
Eaton
$0.00
/ ea
- Amperage Rating: 80/100
- Connection Type: Dual Key Micro
- Enclosure Type: NEMA 1/2/3/4/4X/6/12/13
- Frequency Rating: 50/60
- Light Source: LED
- Mounting Type: Surface
- Operating Temperature: -13 to 131
- Output Type: Solid State Relay
- Response Time: 3
- Sensing Beam: Red Laser
- Sensing Method: Retroreflective
- Sensing Range: 15
- Shape: Tubular
- Size: 0.47 in L x 0.71 in W x 2.75 in H
- Type: 3/4-Wire
- Vibration: 30 g Over 10 Hz to 2 kHz
- Voltage Rating: 20 to 132 VAC, 15 to 30 VDC
- Wattage: 1.5
Eaton OEM Prism 18mm tubular photoelectric sensor, Retroreflective, Right Angle, Output ON, Dual key micro, 80 mA AC/100 mA DC at 20-132V, 4 pin, Isolated SSR, 20-132 Vac 50/60 Hz, 15-30 Vdc
- Features
- Small size for use in a wide variety of applications and locations
- High sensing power for longer ranges and resistance to dust and dirt
- Adjustable gain control to ensure peak optical performance
- High noise immunity which greatly reduces problems associated with electrical noise
- AC/DC models which allow you to order and stock one model for both voltages
- Isolated outputs for wiring flexibility
- Short circuit protection is provided by an adjustable instantaneous only
- Highly visible output status LED
- Structural polyurethane foam body, PVC cable and polycarbonate lens
- 400 VAC maximum output isolation
- 200 VAC peak/180 VDC voltage switching capacity
- 10 uA maximum off-state leakage
- 25 Ohm maximum ON-state resistance
- Light steady when output is on
- 80 mA AC load, 110 mA at 132 VDC (derate to 100 mA at 180 VDC) current switching capacity