Leviton ODS0D-TDG
Leviton Decora ODS0D-TDG 1-Pole Dual Relay Self-Adjusting Occupancy Sensor, 120/277 VAC, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing, Wall Mount
Hand Tools
7552971
ODS0D-TDG
Leviton
$0.00
/ ea
- Color: Gray
- Control Output: Manual On/Automatic Off
- Coverage: 2100
- Dimensions: 46 in H x 1.75 in W x 1.83 in D
- Mounting Type: Wall
- Power Rating: 800 W at 120 VAC INC, 1200 VA at 120 VAC, 2700 VA at 277 VAC FL
- Response Frequency: 50/60
- Sensor Type: Passive Infrared
- Temperature Rating: 0 to 50
- Time Delay: 30 s to 30 min
- Type: 1-Pole Dual Relay Self-Adjusting
- Viewing Angle: 180
- Voltage Rating: 120/277
Dual-Relay, Decora Passive Infrared Wall Switch Occupancy Sensor, Auto or Manual-On, 180 Degree, 2100 sq. ft. Coverage, Title 24, Gray
- Features
- Provides automatic switching for two separate banks of fluorescent, incandescent or Low-Voltage lighting from a single unit
- Convenient dual pushbuttons provide manual-on/off light switching of each load at any time
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- Auto-adapting delayed-off time interval compensates for real-time occupancy patterns, preventing unnecessary on/off switching
- Exclusive walk-through feature provides increased energy-saving by not leaving the lights on for an extended period after only momentary occupancy
- Non-adaptive mode disables self-adjusting delayed-off time and walk-through feature in applications where these features are not desired
- Daylight harvesting light sensor measures the ambient light in the room when it first detects motion
- Low profile design eliminates obtrusive scanning device look, Elegant Decora® wallplates complement any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field-of view provides approximately 2100 sq-ft of coverage, suitable for a variety of commercial areas
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Horizontal field-of view may be adjusted between 180 deg and 60 deg arc by using integral blinders located on either side of the lens
- Time delay adjustment for delayed-off time settings of 30 s, 5, 10 and 30 min, allows customized adjustments to maximize energy-saving
- Vandal-resistant PIR lens
- False detection circuitry
- Light sensor adjustable ambient light override ranges from approximately 2 foot candles (20 Lux) to 500+FC (5000+ Lux)
- Manual on/auto-off mode for installations where manual-On switching is required but Auto-Off switching is still desired for CEC Title T24 energy-saving
- Red LED indicator light flashes when PIR sensor detects motion to verify detection is active
- Beep warn unit beeps 3 times after delayed-off time expires, then waits 10 s before turning lights Off
- One unit can be used for 120 through 277 VAC lighting, compatible with both electronic and magnetic ballasts
- Primary relay switches at the zero-crossing point of the AC power curve to ensure longer contact life, ODSOD-ID conference room mode primary