Appleton EYSEF150AL

Appleton UNILETS EYSEF150AL Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 1-1/2 in, For Use With IMC/Threaded Rigid Metallic Conduit, Almag 35 Aluminum, Epoxy Powder Coated
Channel-Strut Accessories
6937408 EYSEF150AL
Appleton
$0.00 / ea

Appleton EYSEF150AL
  • Dimensions: 6-1/4 in L x 3 in W
  • Finish: Epoxy Powder Coated
  • Material: Almag 35 Aluminum
  • Series: EY Series
  • Size: 1-1/2
  • Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
  • Type: Dust-Ignitionproof Explosionproof Raintight
UNILETS EY Series 40 PCT Expanded Fill Vertical And Horizontal Conduit Sealing Fitting, Size: 1-1/2 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Female Threaded, Turning Radius: 2.31 IN, Length: 6-1/4 IN, Width: 3 IN, Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Division 1 And 2 Groups C, D, Class II, Division 1 And 2 Groups E, F, G, Class III, For Use With Threaded Rigid Metal Conduit and IMC
QTY
Add to Wishlist
  • Features
  • Smooth, rounded integral bushing in each hub to protect conductor insulation
  • Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
  • Restrict any explosion to the sealed off enclosure
  • Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
  • Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
  • Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
  • 40% fill expanded fill sealing fittings for close turning radius