Eaton EDS2130

Crouse-Hinds FlexStation™ EDS2130 1-Gang 3-Pole 3-Way Dead End Factory Sealed Snap Switch Control Station With Switch, 120 to 277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating
Explosionproof Outlet Boxes
6878340 EDS2130
Eaton
$0.00 / ea

Eaton EDS2130
  • Actuator: Handle
  • Amperage Rating: 20
  • Connection Type: Thread
  • Dimensions: 5-7/8 in L x 3-1/2 in W x 3-1/16 in H
  • Finish: Electro-Galvanized/Aluminum Acrylic Painted
  • Material: Feraloy® Iron Alloy
  • Mounting Type: Surface
  • Nema Rating: NEMA 3/7B/7C/7D/9E/9F/9G
  • Number of Poles: 3
  • Operator Type: Front
  • Series: EDS
  • Type: 1-Gang 3-Pole 3-Way Dead End Factory Sealed
  • Voltage Rating: 120 to 277
Eaton Crouse-Hinds series EDS snap switch control station, 20A, With switch, With one 3/4" hub, Feraloy iron alloy, 1, Single-gang, Three-pole, 120-277V, Factory sealed, Dead end, 3-way, 3/4", 120-277 Vac
QTY
Add to Wishlist
  • Features
  • Reduce installation problem
  • Eliminate external seals
  • Lower installation cost
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • Dust ignitionproof, raintight
  • To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
  • In conjunction with magnetic starters or contactors for remote control of motors
  • For manual starting of small AC/DC motors
  • To provide manual starting and stopping and motor running protection (with heater)
  • 3/4 in hub