Appleton EYF125-AL
Appleton® UNILETS® EYF125-AL Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 1-1/4 in, For Use With IMC/Threaded Rigid Metallic Conduit, Almag 35 Aluminum, Epoxy Powder Coated
Sealoffs
445182
EYF125-AL
Appleton
$0.00
/ ea
- Dimensions: 4.94 in L x 2 in W
- Finish: Epoxy Powder Coated
- Material: Almag 35 Aluminum
- Series: EY Series
- Size: 1-1/4
- Suitable For Use With: IMC/Threaded Rigid Metallic Conduit
- Type: Dust-Ignitionproof Explosionproof Raintight
Appleton® UNILETS® Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EY Series, 1-1/4 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Almag 35 Aluminum, Epoxy Powder Coated, 4.94 in L x 2 in W
- Features
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius