Eaton MD11E75
EATON MD11E75 Type DT-3 Dry Ventilated Drive Isolation Transformer, 460 Delta VAC Primary, 400Y/231 VAC Secondary, 11 kVA Power Rating, 60 Hz, 3 Phase
Transformers
7572503
MD11E75
Eaton
$0.00
/ ea
- Connection Type: Lug
- Dimensions: 16-1/2 in L x 23 in W x 30 in H
- Enclosure Type: NEMA 2
- Frequency Rating: 60
- Housing Material: Steel
- Insulation: Class R/220 deg C
- Mounting Type: Threaded
- Number of Taps: 2
- Phase: 3
- Power Rating: 11
- Primary Voltage: 460 Delta VAC
- Secondary Voltage: 400Y/231 VAC
- Series: MD Series
- Temperature Rating: 150
- Type: Type DT-3 Dry Ventilated
EATON Drive Isolation Transformer, Type DT-3 Dry Ventilated, Series: MD Series, 460 Delta VAC Primary, 400Y/231 VAC Secondary, 11 kVA, 60 Hz, 3 Phase, 2 Taps, Lug, Threaded Mount, Class R/220 deg C, NEMA 2, 150 deg C, Steel Housing, 16-1/2 in L x 23 in W x 30 in H
- Features
- Thermal sensors embedded in coils can be wired to provide a signal to remote locations, indicating potential heating problems within the transformer coils
- Get fast and easy connection with front accessible primary and secondary terminals
- Easily identify terminals with clear labeling
- Reduce installation time with slotted screw mounting holes in enclosure and cover
- Reduce noise levels to meet NEMA ST-20 with sound dampening pads that isolate the core and coil from the case
- Short term overload capability as required by ANSI
- Core laminations of precision sheared silicon steel are hand stacked to ensure quiet operation
- 3 ph transformers have one 5% full capacity tap above and below nominal voltage for incoming source adjustment
- Units are suitable for continuous operation in a 40 deg C ambient maximum
- Full current neutral
- Thermoguard protection embedded in coils of 3 ph models to indicate that high temperatures (approximately 190 deg C) are present, thermoguards consist of a set of NO dry contacts
- 3 coil delta-wye configurations are used throughout the product line
- Aluminum windings