NSI IT-250
NSI IT-250 250-6 AWG INSUL-TAP CONN
Terminal Kits
299921
IT-250
NSI
$0.00
/ ea
- Conductor size: 6 AWG to 250 kcmil
- Conductor Type: Aluminum/Copper
- Dimensions: 2.12 in L x 2.25 in W x 2.25 in H
- Finish: Black
- Material: Plastisol
- Series: IT Series
- Specifications: 1 Pole, 2 Conductor, Class B and C Wire Type, 5/16 in Hex
- Temperature Rating: -45 to 90
- Type: Double Sided Entry
- Voltage Rating: 600
The Polaris IT-250 Multi-Tap Dual-Side Entry Connector features 2 ports sized for 250 MCM to 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
- Features
- Insulated tap connectors are suitable for connecting two wires
- Supplied with removable access plugs to close the entry port not being utilized
- Provided with open wire entry ports on both sides of the connector
- Will not support combustion
- Not recommended for fine stranded, flexible wire
- Available in two styles with wires being connected from the same side of the connector or opposite sides of the connector
- Dual rated for use with aluminum and copper cables