ABB Installation Products 25PCJ1G1230
Elastimold 25PCJ1G1230 Insulated Power Cable Joint With Single Piece Housing, 25 kV, 0.76 to 2.12 in Dia Cable, 1 to 1/0 AWG Conductor, EPDM Rubber
Wire Joints
7299936
25PCJ1G1230
ABB Installation Products
$0.00
/ ea
- Cable Diameter: 0.76 to 2.12
- Cable Type: Fabric Tape Shielded/Lead Jacketed
- Color: Black
- Conductor size: 1 to 1/0
- Connector Type: Compression
- Dimensions: 14-3/8 in L
- Insulation Size: 0.76 to 0.95
- Material: EPDM Rubber
- Number of Conductors: 2
- Temperature Rating: -40 to 65
- Type: Insulated
- Voltage Rating: 25
25kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.760 inch to 0.950 inch. Aluminum Conductor. Conductor Size AWG Stranded #1/Solid 1/0.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable, ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Stranded/solid aluminum conductor