ABB Installation Products 35PCJ1K1260
Elastimold 35PCJ1K1260 Insulated Power Cable Joint With Single Piece Housing, 35 kV, 0.85 to 2.12 in Dia Cable, 3/0 to 4/0 AWG Conductor, EPDM Rubber
Wire Joints
7299992
35PCJ1K1260
ABB Installation Products
$0.00
/ ea
- Cable Diameter: 0.85 to 2.12
- Cable Type: Fabric Tape Shielded/Lead Jacketed
- Color: Black
- Conductor size: 3/0 to 4/0
- Connector Type: Compression
- Dimensions: 2-7/16 in Dia x 14-3/8 in L
- Insulation Size: 1.09 to 1.31
- Material: EPDM Rubber
- Number of Conductors: 2
- Type: Insulated
- Voltage Rating: 35
35kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 1.090 inch to 1.310 inch. Aluminum Conductor. Conductor Size AWG Stranded 3/0 /Solid 4/0.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable, ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Stranded/solid aluminum conductor