Eaton Crouse-Hinds EBBRA304 WT30 3
Crouse-Hinds Arktite EBBRA304 WT30 3 Style 2 Dust-Ignitionproof Raintight Interlocked Receptacle, 480 VAC, 250 VDC, 30 A, 4 Poles, 3 Wires, Natural
Receptacles
7379221
EBBRA304 WT30 3
Eaton Crouse-Hinds
$0.00
/ ea
- Amperage Rating: 30
- Color: Natural
- Dimensions: 14.06 in W x 10.25 in D x 22.85 in H
- Material: Aluminum
- Nema Rating: NEMA 3/3R/7B/7C/7D/9F/9G/12
- Number of Poles: 4
- Number Of Wires: 3
- Series: EBBR
- Type: Style 2 Dust-Ignitionproof Raintight
- Voltage Rating: 480 VAC, 250 VDC
Eaton Crouse-Hinds series Arktite EBBR interlocked receptacle, 30A, 30A circuit breaker, Three-wire, four-pole, Solid door, With breaker, Style 2, Cutler-Hammer, Copper-free aluminum, Spring door, 1-1/2", 480 Vac/250 Vdc
- Features
- Rugged, corrosion-resistant, cast copper-free aluminum construction
- Accepts compatible Arktite® plug of same rating and configuration
- Mechanical interlock mechanism for dead front construction
- Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
- A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
- Plug and receptacle contacts cannot be made or broken under load
- Operating handles can be padlocked in either on or off positions, breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the on position
- Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
- Total compliance to the wiring and room requirements of the national electrical Code®
- Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Copper-free aluminum hinges allow the cover to swing well out of the way
- Stainless steel, quick release, captive, hex head cover bolts stainless steel springs provide clear indication cover bolts are fully retracted from body
- Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' breakers
- Copper-free aluminum body, cover and receptacle, fiberglass-reinforced polyester contact insulator material, copper-free aluminum operating handle material
- Stainless steel operating shaft and bushing
- 1-1/2 in hub, natural copper-free aluminum, brass and stainless steel, natural (red) fiberglass-reinforced polyester, electro tin plated leaded red brass
- EBBR interlocked receptacles with circuit breakers are used as a service outlet for portable equipment indoors or outdoors in damp, wet, corrosive locations, without the need for a protective shelter
- In areas which are hazardous due to flammable vapors, gases or combustible dust, refineries, chemical plants and other processing and handling facilities of a hazardous nature
- In areas where frequent wash downs are necessary or where heavy rain or water spray is prevalent