Hubbell Wiring HBL430MIF7W

Wiring Device-Kellems HBL Circuit-Lock HBL430MIF7W 3-Phase Female Fusible Grounding Non-NEMA Standard Watertight Pressure Screw Terminal Pin and Sleeve Mechanical Interlock, 480 VAC, 30 A, 3 Poles, 4 Wires
Receptacles
556366 HBL430MIF7W
Hubbell Wiring
$0.00 / ea

Hubbell Wiring HBL430MIF7W
  • Amperage Rating: 30
  • Color: Red
  • Dimensions: 10.18 in L x 8.43 in W x 15.36 in H
  • Enclosure: NEMA 4X/12K/IP67
  • Hub Size: 1 in NPT
  • Material: Thermoplastic
  • Mounting: Threaded
  • Number of Poles: 3
  • Number Of Wires: 4
  • Power Rating: 14400
  • Type: 3-Phase Female Fusible Grounding Non-NEMA Standard Watertight Pressure Screw Terminal
  • Voltage Rating: 480
Wiring Device-Kellems, HBL430MIF7W, Pin and Sleeve Mechanical Interlock, 3-Phase Female Fusible Grounding Non-NEMA Standard Watertight Pressure Screw Terminal, 480 VAC, 30 A, 14400 W Power, 3 Pole, 4 Wires, 1 in NPT Hub, NEMA 4X/12K/IP67 Enclosure, Threaded Mounting, Thermoplastic, Red, 10.18 in L x 8.43 in W x 15.36 in H Dimensions
QTY
Add to Wishlist
  • Features
  • Enclosure is molded of rugged thermoplastic PBT to resist abuse, corrosion and enhance safety
  • Stainless steel 1/4 turn door fasteners for quick, easy access to fuses
  • High visibility red handle can be locked in the off position as a method of compliance with OSHA lockout requirements
  • Accepts up to a 5/16 in padlock shackle
  • Replaceable spring loaded receptacle lift cover with gasket ensures dusttight rating, lift cover provides watertight seal when turned and locked
  • Removable door for ease of wiring and installation
  • Compact fused disconnect switch accepts class ''J'' fuses
  • Fuse holders are top mounted for easy access
  • The switch accepts auxiliary contacts for control circuit applications including the ON/OFF control of remote pilot lights or signal for programmable controllers
  • Thermoset polyester contact carrier provides resistance to electrical tracking and withstands higher temperatures
  • Thermoset properties provide excellent dimensional stability, low moisture absorption and superior dielectric strength
  • Three molded-in conduit drill points are located on the top, bottom and back surface of enclosure
  • Conduit hub and adjustable mounting feet (4) are ductile to allow mounting on irregular surfaces