Appleton EFDB175U1
Appleton EFDB175U1 1-Gang 1-Circuit Dead End Pushbutton Control Station, 600 VAC, 10 A, 1NC-1NO Contact, 1 Operators, NEMA 3/7CD/9EFG NEMA Rating
Wall Plates
6936692
EFDB175U1
Appleton
$0.00
/ ea
- Amperage Rating: 10
- Connection Type: Thread
- Contact Configuration: 1NC-1NO
- Contact Mode: Momentary
- Dimensions: 4.63 in H x 3 in W x 4.69 in D
- Finish: Triple Coated
- Legend: Start/Stop
- Material: Malleable Iron
- Mounting Type: Surface
- Nema Rating: NEMA 3/7CD/9EFG
- Number of Operators: 1
- Operator Type: Front Button
- Series: EFDB
- Type: 1-Gang 1-Circuit Dead End
- Voltage Rating: 600
EFDB Series 1-Gang 1 Circuit Push Button Switch, Action: Momentary, Contact Configuration: 1 NO/1 NC, Contact Rating: 10 AMP At 600 VAC, Enclosure: NEMA 3, 7CD, 9EFG, Mounting: Surface Mount With 3/4 IN Dead-End Hub, Material: Malleable
- Features
- Eliminate need for adding sealing fittings and compound at each conduit entrance
- Dozens of possible combinations of push buttons, selector switches and pilot lights
- Smooth, rounded integral bushing in each EFD/EFDB hub protects conductor insulation
- Accurately tapped, tapered hubs for tight, rigid joints and ground continuity
- Stainless steel pushbutton shaft operates within stainless steel bushing assuring long, maintenance free operation
- Pushbutton and selector switch contacts are silver cadmium oxide which are "sealed" in lower phenolic chamber isolated from corrosive elements
- Assures positive contact and long, trouble free operation
- Enclosed stainless steel helper spring prevents accidental operation of pushbutton in severe vibration installations
- Pushbutton models also available with dust cap for use in areas where excessive dust, moisture or corrosive conditions are encountered
- Corrosion resistant captive stainless steel hex head cap screws hold EFKB covers to body
- Factory sealed selector switches furnished with nylon camoperated, heavy duty push buttons for either 2-position or 3-position maintained contact operation