Leviton ODS15-TDI
Leviton Decora ODS15-TDI 1-Pole Vacancy Sensor, 120/230/277 VAC, PIR Sensor, 2100 sq-ft Coverage, 180 deg Viewing, Wall Mount
Occupancy and Motion Sensors
7552975
ODS15-TDI
Leviton
$0.00
/ ea
- Color: Ivory
- Control Output: Manual On/Automatic Off
- Coverage: 2100
- Dimensions: 46 in H x 1.75 in W x 1.85 in D
- Lamp Type: Fluorescent/Incandescent
- Mounting Type: Wall
- Power Rating: 120/280
- Response Frequency: 50/60
- Sensor Type: PIR
- Temperature Rating: 0 to 50
- Time Delay: 30 s to 20 min
- Type: 1-Pole
- Viewing Angle: 180
- Voltage Rating: 120/230/277
ODS15 Technology Passive Infrared ON/OFF Configurations Manual ON/Auto OFF Switch Type Single-Pole Mounting Wall Switch Device Type Vacancy Sensor Coverage 2100 Sq Ft Pattern 180 degree Color Ivory Warranty 5-Year Limited
- Features
- Fits in standard wallbox and replaces 1-pole wall switch, ground connection required, gangable with other units
- Low profile design eliminates obtrusive "scanning device" look
- Elegant Decora® wallplates compliment any interior for sleek aesthetics, uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
- 180 deg field of view provides approximately 2100 sq-ft of coverage
- Convenient pushbutton provides manual ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance
- Designed with an extensive ''minor motion'' area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for ca title 20/24 and NYC L48 energy savings
- Red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10 and 20 min in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
- Self-adjusting delayed OFF time interval compensates for real time occupancy patterns, preventing unnecessary ON/OFF switching
- Exclusive Walk-through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
- Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- 1-unit can be used for 120 to 277 VAC lighting, compatible with both electronic and magnetic ballasts