Wattstopper WS-301-W
WattStopper WS-301-W Wall Switch Occupancy Sensor, 120/277 VAC, Passive Infrared Sensor, 900 sq-ft Coverage, 180 deg Viewing, Strap Mount
Occupancy and Motion Sensors
7325849
WS-301-W
Wattstopper
$0.00
/ ea
- Color: White
- Connection Type: Flying Lead
- Control Output: Automatic On/Off, Manual On/Off
- Coverage: 900
- Dimensions: 2.68 in L x 1.75 in W x 1.04 in H
- Lamp Type: LED/Tungsten
- Material: Plastic
- Mounting Type: Strap
- Power Rating: 0 to 1200 W, 1/6 hp
- Sensor Type: Passive Infrared
- Series: WS Series
- Temperature Rating: 35
- Time Delay: 30 s to 30 min
- Viewing Angle: 180
- Voltage Rating: 120/277
The WS-301 Passive Infrared (PIR) Wall Switch Sensor turns lighting or fan loads on and off based on occupancy and ambient light level. The sensor replaces existing wall switches and fits behind a standard decorator wall plate. (white)
- Features
- Time delay adjustment from 30 sec up to 30 min
- Minimum to maximum sensitivity adjustment
- 0 to 1000 VA tungsten, ballast, E-ballast, LED driver, 1/4 hp motor load requirement for each relay at 120 VAC, 0 to 1200 VA ballast, E-ballast and LED, 1/4 hp motor load requirement for each relay at 277 VAC
- Complies with 2011 NEC requirements
- Zero crossing circuitry reduces stress on the relay and results in increased sensor life
- Adjustable time delay and sensitivity
- Custom 2-tier fresnel lens enhances detection at the desktop level
- Sensor coverage tested to NEMA guide publication WD 7 to 2000
- Light level sensor holds lights off when ambient lighting is above the preset level
- Patented voltage drop protection
- For safety, there is no leakage to load in the Off mode and sensor is safety grounded
- LED indicates occupancy detection
- Ballast E-ballast load type
- Turns lighting or fan loads on and off based on occupancy and ambient light level
- The sensor replaces existing wall switches and fits behind a standard decorator wallplate
- Optional neutral