Ideal 46-606

IDEAL Thermo-Shrink 46-606 Heat Shrink Tubing, 0.346 in ID Expanded, 0.157 in ID Recovered, 0.022 in THK Wall Recovered, 4 ft L, Polyolefin, Black
Lighting Motion Control
111153 46-606
Ideal
$0.00 / ea

Ideal 46-606
  • Color: Black
  • Inner Diameter Expanded: 0.346
  • Inner Diameter Recovered: 0.157
  • Length: 4
  • Material: Polyolefin
  • Shrink Ratio: 2:1
  • Shrink Temperature: 70
  • Temperature Rating: -55 to 125
  • Voltage Rating: 600
  • Wall Thickness Recovered: 0.022
  • Wall Type: Thin
  • Wire size: 4 to 1
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 5/16 IN, Thickness: 022 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 4 - 1 AWG, Nominal Recoveredi.d. (max.): 0.157 IN, Expanded I.d. (min.): 0.346, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55°c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 5/16 IN, Package: Disk
QTY
Add to Wishlist
  • Features
  • Polyolefin material electrically insulates and protects inline components, disconnect terminals and splices with its high strength and excellent resilience
  • Use to bundle wires for very flexible light duty harnesses
  • Highly flame-retardant and flexible
  • Resistant to common fluids and solvents
  • UV-resistant
  • 30% eccentricity
  • 600% elongation at break for ASTM D638 test method
  • 350% elongation of break after aging for UL 224 test method
  • No PBBs and PBBEs
  • -55 deg C/4 hr cold blend test no cracking for UL 224 test method
  • Copper corrosion and chemical resistance pass for UL 224 test method
  • +/-5% longitudinal shrinkage