Dodge 127673
Dodge® E-Z-Kleen® 127673 206 Normal Duty Pillow Block Ball Bearing Unit With Insert, 1-3/16 in Dia Bore, 4.26 to 5 in L Bolt Center-to-Center, 1.69 in Base to Bore Centerline, 6-1/4 in OAL x 3.19 in OAH
Pillow Block Ball Bearing Units
7678428
127673
Dodge
$0.00
/ ea
- Base to Bore Centerline: 1.69
- Base Width: 1-1/4
- Bolt Center-to-Center Length: 4.26 to 5
- Bore Diameter: 1-3/16
- Bore Type: Round
- Expansion Type: Non-Expansion (Fixed)
- Finish: Nickel Plated
- Load Capacity: 4368 lb Dynamic/2538 lb Static
- Locking Device: 65 deg Set Screw
- Material: Stainless Steel
- Maximum Speed: 5250
- Mounting Type: Two-Bolt Base
- Overall Height: 3.19
- Overall Length: 6-1/4
- Overall Width: 1.52
- Seal Type: Triple Lip
- Series: 206
- Temperature Rating: -20 to 225
- Type: Normal Duty
Dodge® E-Z-Kleen® Pillow Block Ball Bearing Unit, Normal Duty, Series: 206, 1-3/16 in Bore, 4.26 to 5 in Bolt Center-to-Center Length, 1.69 in Base to Bore Centerline, 6-1/4 in Overall Length, 1.52 in Overall Width, 3.19 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-1/4 in Base Width, 65 deg Set Screw Locking Device, Triple Lip Seal, Non-Expansion (Fixed) Expansion, 4368 lb Dynamic/2538 lb Static Load, -20 to 225 deg F, 5250 rpm Maximum, Stainless Steel, Nickel Plated
- Features
- 65 deg setscrew locking system
- Wide inner ring design
- Housings feature a solid base, with no cavities or fillings to trap contaminants
- Mechanically retained QuadGuard™ triple lip seal features a rubberized flinger that closes the gap left by conventional all metal flinger designs
- Maxlife™ cage creates grease compartments around each rolling element, allowing balls to be constantly in contact with grease and retain grease during high pressure washdown
- H1 registered food grade lubricant
- Higher back pillow block
- Corrosion resistant insert