Gates 9414-0500
Gates reg; Super HC reg; 94140500 Heavy Duty Molded Notch V-Belt, 5VX Section, 5/8 in W Top, 50 in L Outside, 35/64 in THK, EPDM
Wedge Belts
7242165
9414-0500
Gates
$0.00
/ ea
- Material: EPDM
- Minimum Pulley Diameter: 7.958
- Number of Ribs: 1
- Outside Length: 50
- Reinforced Material: Flex-Bonded Polyester
- Section Size: 5VX
- Series: 9414
- Temperature Range: -70 to 250
- Thickness: 35/64
- Top Width: 5/8
- Type: Heavy Duty Molded Notch
Gates® Super HC® V-Belt, Heavy Duty Molded Notch, Series: 9414, 5VX Section, 5/8 in Top Width, 50 in Outside Length, 35/64 in Thickness, 1 Rib, 7.958 in Diameter Minimum Pulley, -70 to 250 deg F, EPDM, Flex-Bonded Polyester Reinforced
- Features
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility making this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in smoother running, less slip and wear
- Patented ethylene material construction provides -70 to 250 deg F temperature range to resist belt cracking