Appleton ESUF50
Appleton® Unilets™ ESUF50 ESU Dust-Ignitionproof Explosionproof Conduit Sealing Fitting, 1/2 in, For Use With IMC/Threaded Rigid Metal Conduit, Malleable Iron, Tri-Coated
Sealoffs
108677
ESUF50
Appleton
$0.00
/ ea
- Dimensions: 3 in L x 2.94 in W
- Finish: Tri-Coated
- Material: Malleable Iron
- Mounting Type: Surface
- Series: ESU
- Size: 1/2
- Suitable For Use With: IMC/Threaded Rigid Metal Conduit
- Type: Dust-Ignitionproof Explosionproof
Appleton® Unilets™ Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof, Series: ESU, 1/2 in, For Use With: IMC/Threaded Rigid Metal Conduit, Surface Mount, Malleable Iron, Tri-Coated, 3 in L x 2.94 in W
- Features
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Accurately tapped, tapered hub threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- For sealing vertical or horizontal conduit
- Pouring spout rotates 90 deg
- Removable cover provides full access for damming 1/2 to 1 in sizes have threaded cover openings for damming
- 1-1/4 in turning radius
- Triple coat of zinc electroplate, chromate and epoxy powder coated finish
- Prevent passage of gases, vapors or flames from one portion of conduit system to another
- Restrict any explosion to the sealed off enclosure
- Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit
- Seal must be located within 18 in of either enclosure