Appleton EYF100
Appleton UNILETS Conduit Sealing Fitting, Dust-Ignitionproof Explosionproof Raintight, Series: EY Series, 1 in, For Use With: IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated, 4-1/4 in L x 1-3/4 in W
Supporting Information
- Smooth, rounded integral bushing in each hub to protect conductor insulation|Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity|Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub|Restrict any explosion to the sealed off enclosure|Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures|Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps|Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location|Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure|Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations|25% fill vertical and horizontal conduit sealing fittings for close turning radius|Chromate/epoxy powder coated/zinc electroplated finish
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- Restrict any explosion to the sealed off enclosure
- Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
- 25% fill vertical and horizontal conduit sealing fittings for close turning radius
- Chromate/epoxy powder coated/zinc electroplated finish
- Brand: AppletonDimensions: 4-1/4 in L x 1-3/4 in WFinish: Triple CoatedMaterial: Malleable IronSeries: EY SeriesSize: 1Suitable For Use With: IMC/Threaded Rigid Metallic ConduitType: Dust-Ignitionproof Explosionproof Raintight