Wire & Cable 13078102

Southwire® 13078102 Type SEU/XHHW-2 Service Entrance Cable, 600 VAC, (3) 4 AWG Annealed Stranded Copper Conductor, 150 ft L, Gray
Service Entrance Wire
856 13078102
Wire & Cable
Request a Quote for Pricing

Out of Stock

Out of Stock

  • Amperage Rating: 95
  • Conductor size: 4
  • Conductor Type: Annealed Stranded Copper
  • Jacket Color: Gray
  • Jacket Material: PVC
  • Length: 150
  • Number of Conductors: 3
  • Strands: 7
  • Temperature Rating: 90
  • Type: Type SEU/XHHW-2
  • Voltage Rating: 600
  • Outside Diameter: 771
Southwire® Service Entrance Cable, Type SEU/XHHW-2, 600 VAC, 95 A, 3 Conductors, Annealed Stranded Copper Conductor, 4 AWG Conductor, 771 mil OD, 150 ft Length, 7 Strands, PVC Jacket, Gray Jacket, 90 deg C
  • Features
  • Southwire® type cable is constructed with sunlight resistant type XHHW-2 conductors or type THHN/THWN conductors
  • Copper conductors are annealed (soft) copper
  • Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC
  • SE cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC)
  • Cable shall be UL listed type SE, style U, suitable for operation at 600 volts or less in all installations as specified in the national electrical code
  • Conductors shall be annealed copper, type XHHW-2 or type THHN/THWN, weather-resistant PVC jacketed, as manufactured by Southwire® company or approved equal
  • Jacket and individual conductors sunlight resistant
  • Allowable ampacities shown are for general use as specified by the national electrical Code, 2008 Edition, section 310.15
  • Allowable ampacities when terminated to equipment for circuits rated 100 A or less or marked for 14-1 AWG conductors at 60 deg C
  • Allowable ampacities when terminated to equipment for circuits rated 100 A or marked for conductors larger than 1 AWG conductors at 75 deg C
  • Allowable ampacities wet or dry locations, for ampacity derating purposes at 90 deg C
  • Allowable ampacities for dwelling units, conductors shall be permitted at listed ampacities as 120/240 VAC, 3-wire, single phase services and feeders
  • 55 A at 60 deg C, 65 A at 75 deg c and 75 A at 90 deg C allowable ampacities
  • For wet or dry locations at temperatures not to exceed 90 deg C