Pass & Seymour IG5362OSP

Pass & Seymour® IG5362OSP Duplex Isolated Ground Surge Protective TVSS Straight Blade Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Orange
539092 IG5362OSP
Pass & Seymour
$87.74 / ea

Out of Stock

  • Amperage Rating: 20
  • COLOR: Orange
  • Dimensions: 1.7 in L x 1.25 in W x 3.75 in H
  • Frequency Rating: 60
  • Grade: Commercial/Specification
  • Material: Nylon
  • Nema Rating: NEMA 5-20R
  • Number of Poles: 2
  • Number Of Wires: 3
  • Temperature Rating: -4 to 131
  • terminal type: Back/Side Wire
  • Type: Duplex Isolated Ground Surge Protective TVSS
  • Voltage Rating: 125
Pass & Seymour® Straight Blade Receptacle, Duplex Isolated Ground Surge Protective TVSS, 125 VAC, 20 A, 60 Hz Frequency, 2 Pole, 3 Wires, NEMA 5-20R NEMA Rating, Commercial/Specification Grade, -4 to 131 deg F, Back/Side Wire Terminal, Nylon, Orange, 1.7 in L x 1.25 in W x 3.75 in H Dimensions
  • Features
  • Solid-state LED monitor has 25-year minimum life expectancy
  • Auto-ground is standard, for easier installation
  • LED indication steady green protected, flashing red not protected, off no power to unit
  • Audible alarm alert of MOV damage
  • Alarm able to be turned On-Off
  • Wrap-around steel strap for structural integrity
  • A high visibility, wide angle lens indicates protection is in place
  • Impact-resistant nylon exterior resists impacts and scrapes
  • Triple-wipe, copper alloy contacts for superior and more dependable connection
  • External screw pressure plate back and side wire terminals including ground with external back wire clamps (exclusive) accept 14 to 10 AWG copper or copper-clad, solid or stranded conductors
  • External pressure plate feature allows 2-conductors to be terminated by a single screw
  • Thermal protection in all 3-modes
  • (3) 17 mm dual pack MOVs absorb up to 340 J of excess energy in each leg (L-N, L-G, N-G) with 24000 A current handling capability for full, equal and symmetrical protection
  • Protection response time in less than one nanosecond
  • IG symbol and isolated ground markings for easy identification and circuit delineation
  • Plastic barrier isolates grounding terminal from mounting strap and metal boxes
  • Installation categories-A (ring wave) and B (unidirectional impulse)
  • -40 to 85 deg C storage temperature