Lutron EC3DT4MWKU2S
EcoSystem® EC3DT4MWKU2S Dimming Studded Digital Ballasts, T4 CFL Lamp, 32 W Lamp, 120 VAC, Programmed/Rapid, 0.95 Ballast Factor
Lighting Control Accessories
7089785
EC3DT4MWKU2S
Lutron
$0.00
/ ea
- Amperage Rating: 0.55
- Ballast Factor: 0.95
- Dimensions: 4-9/10 in L x 3 in W x 1 in H
- Dimmable: Yes
- Enclosure Type: NEMA 1
- Frequency Rating: 50/60
- Lamp Base Type: 4-Pin
- Lamp Type: T4 CFL
- Lamp Wattage: 32
- Minimum Starting Temperature: 50
- Mounting Type: Fixture
- Number of Lamps: 2
- Power Factor: 0.95
- Start Type: Programmed/Rapid
- Temperature Range: 167
- Thermal Protection: Class P
- Total Harmonic Distortion: <10%
- Type: Dimming Studded
- Voltage Rating: 120
- Wattage: 66
EcoSystem® Digital Ballasts, Dimming Studded, T4 CFL Lamp, 32 W Lamp, 66 W Wattage, 120 VAC, 0.55 A, 50/60 Hz Frequency, Programmed/Rapid Start, 50 deg F Minimum Starting, Total Harmonic Distortion: <10%, Power Factor: 0.95, Yes Dimmable, 2 Lamps, Thermal Protection: Class P, 4-Pin Lamp Base, Ballast Factor: 0.95, NEMA 1 Enclosure, 167 deg F, Fixture Mounting, 4-9/10 in L x 3 in W x 1 in H Dimensions
- Features
- Continuous, flicker free dimming from 100% to 5%
- Compatible with EcoSystem® energy saver Node unit, GRAFIK Eye® QS with EcoSystem® unit, PowPak™ dimming module with EcoSystem® unit, and Quantum systems, allowing for integration into an existing/planned EcoSystem® lighting control system
- Supports standard 3-wire line-voltage phase control technology
- Programmed rapid start design ensures full rated lamp life while dimming and cycling
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Frequency of operation ensures that ballast does not interfere with infrared devices
- Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure
- Ultra-quiet operation
- Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground
- End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life
- Nonvolatile memory restores all ballast settings after power failure
- 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem® digital controls
- 100% performance tested at factory
- Ballast is grounded by the specified terminal or by a mounting screw to the fixture
- Ballast mounts using two mounting tabs or studs within a fluorescent fixture
- Within a fluorescent fixture mounting, K case size
- 4560 lumens
- 69.1 lm/W system efficacy
- 1.44 ballast efficacy factor