Wattstopper PW-200-I

WATT PW-200-I PIR Wall Switch Occup
Occupancy and Motion Sensors
6904343 PW-200-I
Wattstopper
$109.40 / ea

Out of Stock

  • COLOR: Ivory
  • Connection Type: Flying Lead
  • Control Output: Automatic On/Off, Manual On/Off
  • Coverage: 525
  • Dimensions: 2.73 in L x 1.76 in W x 1.83 in H
  • Lamp Type: Fluorescent/Incandescent/LED
  • Material: Plastic
  • Mounting Type: Surface
  • Sensor Type: Passive Infrared
  • Series: PW Series
  • Temperature Rating: 35
  • Time Delay: 5 to 30
  • Type: Commercial Dual Relay
  • Viewing Angle: 180
  • Voltage Rating: 120/230/277
  • Power Rating: 0 to 1200 W, 1/6 hp
Legrand-Wattstopper The PW-200 passive infrared (PIR ) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. (ivory)
QTY
  • Features
  • Time delay adjustments - 5 to 30 min at minimum, 3 minimum if no activity after 30 s at walk through mode, 5 s for 10 min with dip switch setting at test mode
  • High or low (dip switch) PIR adjustment
  • 0 to 800 W tungsten or ballast, 1/6 hp motor load limit for each relay at 120 VAC and 0 to 1200 W ballast load limit for each relay at 277 VAC
  • Detection signature analysis eliminates false triggers and provides immunity to RFI and EMI
  • Zero crossing for long relay life
  • Vandal-resistant lens combines precise coverage with durability
  • Choice of manual on or auto-ON operation
  • Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s
  • Test mode allows quick and easy adjustments
  • Selectable audible alert for impending shutoff
  • In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations
  • Four occupancy logic options give users the ability to customize control to meet application needs
  • Optional light level sensing with simple setup
  • Service mode allows sensor to operate as a service switch in the unlikely event of a failure
  • Sensor coverage tested to NEMA guide publication WD 7-2000
  • Compatible with decorator wallplates
  • 2-relays for control of two separate lighting loads or circuits
  • Magnetic or electronic ballast load type
  • Wall switch sensor turns lights off and on based on occupancy
  • It contains two relays for controlling two independent lighting loads or circuits