ABB Installation Products AB225HDGC
Superstrut AB225HDGC 45 deg Channel Angle Bracket, 2 Holes, 2-1/2 in L x 1-5/8 in W x 1/4 in THK, Steel
Bearing Collars and Sleeves
7570602
AB225HDGC
ABB Installation Products
$0.00
/ ea
- Depth: 3-1/2
- Finish: Hot Dipped Galvanized
- Hole Size: 9/16
- Hole Spacing: 13/16 in, 1-7/8 in
- Length: 2-1/2
- Material: Steel
- Number of Holes: 2
- Suitable For Use With: Superstrut® 200 Series Aluminum Channel
- Thickness: 1/4
- Type: 45 deg
- Width: 1-5/8
Channel Angle Bracket. 45 Degree Acute Angle. 2 Holes - 1 Hole X 1 Hole. 3-1/2 Inch X 2-1/2 Inch. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.
- Features
- Zinc coating is applied by hot dipping after fabrication
- Is in conformance with ASTM A-123, grade 65 specification standards
- Load ratings vary depending fittings and brackets are used with 12, 14 or 16 ga channel
- Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately
- 45 deg acute angle bend