Appleton N2LED2T1

Appleton Viamaster N2LED2T1 Emergency Lighting System, LED Lamp, 120 to 277 VAC, Polyester
Wallpacks (HID and LED)
7378586 N2LED2T1
Appleton
$0.00 / ea

Appleton N2LED2T1
  • Amperage Rating: 2.3
  • Average Life: 50000+
  • Color: Gray
  • Color Rendering Index (CRI): 70
  • Color Temperature: 5650
  • Dimensions: 9.8 in L x 8.5 in W x 3.7 in H
  • Enclosure Type: NEMA 4X/IP66
  • Fixture Wattage: 2.513
  • Frequency Rating: 50/60
  • Lamp Type: LED
  • Lens Type: Polycarbonate
  • Lumens: 257.8
  • Material: Polyester
  • Power Source: Ni-Cd Battery
  • Voltage Rating: 120 to 277
Emergency Light Fixture, Type LED, Constructional Feature Dust/Corrosion Resistant, Voltage Rating 120 to 277 VAC at 50/60 Hz, Wattage 3 W, Number of Fixtures 2, Lamp Included Yes, Material Fiberglass Reinforced Polyester, Mounting Direct, Enclosure Class I Div 2 Group A B C D, Class I Zone 2 Group IIC, NEMA IP66/4X, Approval UL 1598A, CSA C22.2, Hub Size 3/4 Inch, Top Entry Size 1-3/4 Inch NPT, Weight 7.2 Lb, With Enclosed and Gasketed
QTY
Add to Wishlist
  • Features
  • 3/4 in hub
  • Constructional feature dust/corrosion-resistant
  • Fiberglass reinforced polyester body and push to test switch, continuous silicone cover gasket, nickel plated brass hub, stainless steel cover screws, aluminum lampheads
  • The electronics consist of a solid state charger, transfer circuit and low voltage battery disconnect circuit
  • Capacity is sufficient for the connection of 6 output watts
  • System supports 4 light heads in any main/remote combination utilizing up to 6 Watts of output power
  • This allows for a main unit without any light heads to drive up to 4 remote units or any other combination of 4 lights
  • Remote lamp head assemblies (one or two) are available for mounting of lampheads away from main power supply system
  • Provides 100% lumen output for 90 minutes of operation with four light heads or 180 minutes of operation with two light heads
  • The solid state charger maintains maintenance-free NiCd battery at full charge, upon power failure or utility voltage (AC) below 50 V, the DC emergency lighting load is connected to the battery
  • During emergency operation, the battery is automatically protected from deep discharge damage by a low voltage battery disconnect (LVD) circuit, upon restoration of normal power, the charger brings the battery to full capacity within acceptable UL time standards