Appleton N2LED2T1
Appleton Viamaster N2LED2T1 Emergency Lighting System, LED Lamp, 120 to 277 VAC, Polyester
Wallpacks (HID and LED)
7378586
N2LED2T1
Appleton
$0.00
/ ea
Emergency Light Fixture, Type LED, Constructional Feature Dust/Corrosion Resistant, Voltage Rating 120 to 277 VAC at 50/60 Hz, Wattage 3 W, Number of Fixtures 2, Lamp Included Yes, Material Fiberglass Reinforced Polyester, Mounting Direct, Enclosure Class I Div 2 Group A B C D, Class I Zone 2 Group IIC, NEMA IP66/4X, Approval UL 1598A, CSA C22.2, Hub Size 3/4 Inch, Top Entry Size 1-3/4 Inch NPT, Weight 7.2 Lb, With Enclosed and Gasketed
- Features
- 3/4 in hub
- Constructional feature dust/corrosion-resistant
- Fiberglass reinforced polyester body and push to test switch, continuous silicone cover gasket, nickel plated brass hub, stainless steel cover screws, aluminum lampheads
- The electronics consist of a solid state charger, transfer circuit and low voltage battery disconnect circuit
- Capacity is sufficient for the connection of 6 output watts
- System supports 4 light heads in any main/remote combination utilizing up to 6 Watts of output power
- This allows for a main unit without any light heads to drive up to 4 remote units or any other combination of 4 lights
- Remote lamp head assemblies (one or two) are available for mounting of lampheads away from main power supply system
- Provides 100% lumen output for 90 minutes of operation with four light heads or 180 minutes of operation with two light heads
- The solid state charger maintains maintenance-free NiCd battery at full charge, upon power failure or utility voltage (AC) below 50 V, the DC emergency lighting load is connected to the battery
- During emergency operation, the battery is automatically protected from deep discharge damage by a low voltage battery disconnect (LVD) circuit, upon restoration of normal power, the charger brings the battery to full capacity within acceptable UL time standards