Eaton Cutler-Hammer DH361URK
Eaton DH Safety Sw. single throw, 3p/600Vac/30amp, non-fused, NEMA 3R enclosure painted steel, enhanced visible blades
Supporting Information
- Fusible and non-fusible switches are 100% load break and 100% load make rated|Non-fusible switches are 100% fully rated|Suitable for service entrance applications unless otherwise noted|Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load|Mechanically interlocked cover to prevent easy access when the switch is in the ON position|Clearly visible palm fitting red handle|Premium 316 grade stainless steel enclosures offer better corrosion-resistance in the presence of most chemicals, salts and acids and is more-resistant to marine atmospheres|Visible double-break quick make, Quick-break blades|Visible ON/OFF indications|30 to 1200 A NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole|Tri-lingual nameplates|Design for all series K heavy duty
- Fusible and non-fusible switches are 100% load break and 100% load make rated
- Non-fusible switches are 100% fully rated
- Suitable for service entrance applications unless otherwise noted
- Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
- Mechanically interlocked cover to prevent easy access when the switch is in the ON position
- Clearly visible palm fitting red handle
- Premium 316 grade stainless steel enclosures offer better corrosion-resistance in the presence of most chemicals, salts and acids and is more-resistant to marine atmospheres
- Visible double-break quick make, Quick-break blades
- Visible ON/OFF indications
- 30 to 1200 A NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole
- Tri-lingual nameplates
- Design for all series K heavy duty
- Brand: Eaton Cutler-HammerAmperage Rating: 30Contact Form: TPSTDimensions: 16.5 in L x 9.12 in W x 8.31 in HEnclosure Type: NEMA 3RFinish: Galvanized/Painted