Woodhead 4052
Woodhead® Watertite® Pushbutton Pendant Station Switch, SPDT-DB, Series: 130126, 240 VAC, 10 A, Momentary Operator, Flush Round Pushbutton Actuator, Compression Cord Grip Connection, Surface Mounting, Nylon, Yellow, 6 in L x 1.88 in W x 1.86 in H Dimensions
Supporting Information
- Lightweight, polycarbonate pendant enclosure is double insulated, UV stabilized and chemically resistant to provide long life|Ergonomic design fits easily in the palm of your hand for greater comfort and reduced fatigue|Single speed, double throw, momentary contacts can be wired either normally open or normally closed for complete application flexibility|An elastic, chemically resistant gasket ensures a tight seal between front and back|MAX-LOC strain relief included as standard to provide maximum cord pullout resistance|Neoprene cover gasket seal, rubber pushbutton diaphragm seal|MAX-LOC nylon strain relief with rubber grommet cord connection, stainless steel cover face screws|35 self-adhesive, pre-printed labels on one acetate sheet nameplate set|5/16 to 5/8 in Dia cord|Two buttons, F2 1/2 in cord grip body size, 1/2 hp at 125 VAC, 3/4 hp at 250 VAC, 1 hp at 125 VAC or 250 VAC|Wet industrial duty|Single speed, double throw, momentary type, fine sliver|240 VAC 30 A make 3 A break|Compression cord grip with support hole
- Lightweight, polycarbonate pendant enclosure is double insulated, UV stabilized and chemically resistant to provide long life
- Ergonomic design fits easily in the palm of your hand for greater comfort and reduced fatigue
- Single speed, double throw, momentary contacts can be wired either normally open or normally closed for complete application flexibility
- An elastic, chemically resistant gasket ensures a tight seal between front and back
- MAX-LOC® strain relief included as standard to provide maximum cord pullout resistance
- Neoprene cover gasket seal, rubber pushbutton diaphragm seal
- MAX-LOC® nylon strain relief with rubber grommet cord connection, stainless steel cover face screws
- 35 self-adhesive, pre-printed labels on one acetate sheet nameplate set
- 5/16 to 5/8 in Dia cord
- Two buttons, F2 1/2 in cord grip body size, 1/2 hp at 125 VAC, 3/4 hp at 250 VAC, 1 hp at 125 VAC or 250 VAC
- Wet industrial duty
- Single speed, double throw, momentary type, fine sliver
- 240 VAC 30 A make 3 A break
- Compression cord grip with support hole
- Brand: WoodheadActuator: Flush Round PushbuttonAmperage Rating: 10Color: YellowConnection Type: Compression Cord GripDimensions: 6 in L x 1.88 in W x 1.86 in H