nVent Hoffman VL22
Hoffman SYSPEND VL Motion Arm, Type 4, Series: VM4, For Use With: SYSPEND HMI Enclosures, Specifications: 30 to 100 lb Load Capacity, 22 in, Aluminum, Gray, 6.72 x 25.5 x 3.5 in Dimensions
Supporting Information
- Field-adjustable internal gas spring counterbalance supports loads of 30-100 lbs|Gas springs are set to maximum pressure (100 lb load) and lifting force can be reduced through a sealed access cap in the top of the arm|Provides 13 in of vertical height adjustment|Easily attach to an HMI enclosure using a 60-x-60-mm enclosure mounting pattern (enclosure must be ordered separately)|1.4 in internal cable pathway maintains NEMA Type 4 and 12 enclosure rating and protects wires and cables|Gasketed mounting surfaces at both ends of arm maintain seal integrity|Enclosure and arm can be swiveled 320 deg|Mounting adapter is required with options of wall-mount, machine-top-mount and post-top-mount
- Field adjustable gas spring counterbalance supports loads of 30 to 100 lb
- Gas springs are set to maximum pressure (100 lb load) and lifting force can be reduced through a sealed access cap in the top of the arm (lifting force cannot be increased once spring pressure is reduced)
- Provides 13 in of vertical height adjustment
- Release handle (included with arm) automatically locks arm in place when repositioned vertically (release handle is required to operate the arm)
- Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
- 1.4 in internal cable pathway maintains NEMA type 4 and 12 enclosure rating and protects wires and cables
- Gasketed mounting surfaces at both ends of arm maintain seal integrity
- Enclosure and arm can be swiveled 320 deg
- Wall mount, machine top mount and post top mount options available
- Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
- Brand: nVent HoffmanColor: GrayDimensions: 6.72 x 25.5 x 3.5