nVent Hoffman PTHS162415G4
nVent HOFFMAN PROTEK Electrical Cabinet, Double Hinged Solid Door, Series: DWDH2, 17.09 in Length, 23.62 in Width, 14.96 in Depth, NEMA 4/4X/12 NEMA Rating, 1 Doors, 8RU Rack Unit, 1.11 in THK Door, Lock: Quarter-Turn Slotted Latch, 3.6 A, 115 VAC Electrical Rating, 175 lb Capacity, Wall Mounting, 52 to 131 deg F, Painted Steel, Polyester Powder Painted, Light Gray
Supporting Information
- Front and rear access to 19 in rack equipment provided by three-part design - door, center section and wall section|Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection|All seams are fully welded and ground smooth|Premium seamless, foam-in-place gasket prevents contaminants from entering the cabinet|One set of plated, self-grounding, tapped 10-32 rack angles, which can be adjusted front-to-back, is provided with each center section of the cabinet, additional tapped- or square-hole rack angles can be added to the cabinet to provide additional mounting|On 28 in (700 mm) wide enclosures, a 4 in vertical cable manager with composite fingers is provided on hinge side of cabinet
- Doors made of 16 ga, center and wall sections made of 14 ga steel
- Stainless steel enclosures made from type 304 stainless steel
- Window made of 1/4 in THK, scratch and impact-resistant safety glass
- Front and rear access to 19 in rack equipment provided by three part design door, center section and wall section
- Solid door provides complete physical and visual protection
- Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection
- All seams are fully welded and ground smooth
- Doors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the cabinet
- Premium seamless, foam in place gasket prevents contaminants from entering the cabinet
- Key locking wing knob is included on painted steel cabinet, providing access control to the cabinet, two keys are included with each cabinet
- Stainless steel cabinet is provided with a quarter turn slotted latch
- One set of plated, self-grounding, tapped 10-32 rack angles per EIA universal spacing standards, which can be adjusted front to back, is provided with each center section of the cabinet, additional tapped or square hole rack angles can be added to the cabinet to provide additional mounting
- On 28 in (700 mm) wide enclosures, a 4 in vertical cable manager with composite fingers is provided on hinge side of cabinet
- Wall section welded panel studs which accommodate standard panels
- Brand: nVent HoffmanCapacity: 175Color: Light GrayDepth: 14.96Door Size: 1.11 in THKElectrical Ratings: 3.6 A, 115 VACFinish: Polyester Powder PaintedLength: 17.09Lock: Quarter-Turn Slotted LatchMaterial: Painted SteelMounting Type: Wall