nVent Hoffman MAS0303021R5
nVent HOFFMAN Wall Mount Enclosure, 1-Door, Series: MAS, 300 mm Width, 210 mm Depth, 300 mm Height, NEMA 4/12/13/IK10/IP66 NEMA Rating, 250 mm W x 270 mm H Panel, Lock: 3 mm Customized Double Bit, Wall Mounting, Mild Steel, Powder Coated, Light Gray
Supporting Information
- Body - Folded and seam welded|Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions, to allow air circulation around the rear part of the enclosure|Gland Plate Opening - Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier|For outdoor installation, the use of a rain Hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended|Mounting plate - The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment|On the top and bottom there are holes to facilitate cable fixing|All sides, from 800 mm and above, are strengthened by folded edges|By using the AMG accessory, the mounting plate position can be adjusted to any depth|Material - Body - 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater|Espagnolette three point locking for 1000 mm high enclosures and above|Other inserts are available as an accessory|Door - Surface mounted with 130 deg opening|Concealed removable hinges with captive pin|Hinges can be mounted to allow left or right hand opening|Inner M6 welded studs to mount door profiles MMDP, see delivery|Sealing is ensured by an injected one piece polyurethane gasket|For height 600 mm and above, two MMDP door mounting profiles
- Brand: nVent Hoffman