Hubbell Wiegmann PB4
N4 30.5 MM 4 Pushbutton Enclosure 10.2X3.2X2.7 Carbon Steel - Gray
Supporting Information
- External mounting plates, top and bottom of enclosure|Provide protection from dust, dirt, oil and water|ANSI-61 gray polyester powder inside and out over phosphatized surfaces finish|Continuously welded seams ground smooth|Grounding provisions provided|Standard 4-way pushbuttons holes accept all brands of oil-tight push buttons, switches and pilot lights|Closed cell oil resistant neoprene gasket|10-1/4 in H|Captivated cover screws thread into sealed wells|30.5 mm size
- Continuously welded seams ground smooth
- Closed cell oil resistant neoprene gasket
- External mounting plates, top and bottom of enclosure
- Captivated cover screws thread into sealed wells
- Standard 4-way pushbuttons holes accept all brands of oil-tight push buttons, switches and pilot lights
- Grounding provisions provided
- ANSI-61 gray polyester powder inside and out over phosphatized surfaces finish
- 30.5 mm size
- 10-1/4 in H
- Provide protection from dust, dirt, oil and water
- Brand: Hubbell WiegmannColor: GrayCover Type: ScrewDepth: 2.81Finish: Polyester Powder Coated/Textured