Gates 9012-2060
Gates® Tri-Power® V80® V-Belt, Heavy Duty, Series: 9012, AX Section Size, 1/2 in Top Width, 62 in Outside Length, 5/16 in Thickness, 1 Ribs, -60 to 250 deg F, EPDM, Polyester Reinforced Material
Supporting Information
- Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves|Belt edge is machined for even sheave groove contact resulting in less slip and wear|Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration|Patented EPDM Material construction provides -60 to 250 deg F temperature range to resist belt cracking|Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required|Meets RMA oil and heat resistant standards|Meets RMA static conductivity requirements|Multi-duty recommended sheaves|ARPM number: AX60
- Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves
- Belt edge is machined for even sheave groove contact resulting in less slip and wear
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Patented EPDM Material construction provides -60 to 250 deg F temperature range to resist belt cracking
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required
- Meets RMA oil and heat resistant standards
- Meets RMA static conductivity requirements
- Multi-duty recommended sheaves
- ARPM number: AX60
- Brand: GatesMaterial: EPDMNumber of Ribs: 1Outside Length: 62Reinforced Material: PolyesterSection Size: AXSeries: 9012Temperature Range: -60 to 250Thickness: 5/16Top Width: 1/2Type: Heavy Duty