Minerallac 61617
3/8 x 1-7/8" Sleeve Anchors, Medium Duty, Hex, Used in Cinder Block, Brick, Thin Wall and Concrete, Zinc Plated
Supporting Information
- Anchoring system comprised of a threaded stud, that has a flared conical end a hollow, cylindrical dilating sleeve around the stud and against the minor diameter of the cone and a washer with hex nut assembled at the end opposite to the cone|Can be removed after it's been installed, length of the sleeve induces less stress on the substrate than does a wedge anchor|Use same drill size as bolt diameter|Well suited for permanently anchoring heavy equipment to concrete
- Anchoring system comprised of a threaded stud, that has a flared conical end a hollow, cylindrical dilating sleeve around the stud and against the minor diameter of the cone and a washer with hex nut assembled at the end opposite to the cone
- Can be removed after it's been installed, length of the sleeve induces less stress on the substrate than does a wedge anchor
- Use same drill size as bolt diameter
- Well suited for permanently anchoring heavy equipment to concrete
- Brand: MinerallacDiameter: 03/08/2026, 3/8Drill Size: 03/08/2026, 3/8Finish: Zinc PlatedHead Size: 1/2 in DiaHead Type: Hex NutMaterial: SteelMinimum Embedment Depth: 1-5/8Overall Length: 1-7/8Shear Strength: 3250Tensile Strength: 2700