ABB Installation Products AB225HDGC
Channel Angle Bracket. 45 Degree Acute Angle. 2 Holes - 1 Hole X 1 Hole. 3-1/2 Inch X 2-1/2 Inch. Zinc coating is applied by hot-dipping after fabrication. Is in conformance with ASTM A-123, Grade 65 specification standards. Minimum of 2.5 mill thickness.
Supporting Information
- Zinc coating is applied by hot dipping after fabrication|Is in conformance with ASTM A-123, grade 65 specification standards|Load ratings vary depending fittings and brackets are used with 12, 14 or 16 ga channel|Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately|45 deg acute angle bend
- Zinc coating is applied by hot dipping after fabrication
- Is in conformance with ASTM A-123, grade 65 specification standards
- Load ratings vary depending fittings and brackets are used with 12, 14 or 16 ga channel
- Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately
- 45 deg acute angle bend
- Brand: ABB Installation ProductsDepth: 3-1/2Finish: Hot Dipped GalvanizedHole Size: 9/16Hole Spacing: 13/16 in, 1-7/8 inLength: 2-1/2Material: SteelNumber of Holes: 2Suitable For Use With: Superstrut 200 Series Aluminum ChannelThickness: 1/4Type: 45 deg