Eaton Cutler-Hammer DH361UWK
Eaton DH Safety Sw. single throw, 3p,600Vac,30amp, non-fused, NEMA 4X enclosure 304 stainless steel, enhanced visible blades
Supporting Information
- Clearly visible palm fitting red handle allows users to easily see the handle position (On/Off) from a distance and provides for easy operation|Two points of contact provide a positive open and close, easier operation and also help prevent contact burning for longer contact life|Triple padlocking capability increases personnel safety|Interlocking mechanism keeps the door closed when the handle is in the ON position to maximize safety, although there is a built-in defeater mechanism for user access when necessary|Clear line shield protects against accidental contact with energized parts and the probe holes enable the user to test if the line side is energized without removing the shield|100% rated device means the switch may be used continuously up to its rated current|Meets stringent UL 98 standards for safety, durability and reliability|7-1/2 hp at 480 VAC/10 hp at 600 VAC TD 1-phase, 10 hp at 240 VAC/20 hp at 480 VAC/30 hp at 600 VAC TD 3-phase, 5 hp at 250 VDC maximum hp rating
- Clearly visible palm fitting red handle allows users to easily see the handle position (On/Off) from a distance and provides for easy operation
- Two points of contact provide a positive open and close, easier operation and also help prevent contact burning for longer contact life
- Triple padlocking capability increases personnel safety
- Interlocking mechanism keeps the door closed when the handle is in the ON position to maximize safety, although there is a built-in defeater mechanism for user access when necessary
- Clear line shield protects against accidental contact with energized parts and the probe holes enable the user to test if the line side is energized without removing the shield
- 100% rated device means the switch may be used continuously up to its rated current
- Meets stringent UL 98 standards for safety, durability and reliability
- 7-1/2 hp at 480 VAC/10 hp at 600 VAC TD 1-phase, 10 hp at 240 VAC/20 hp at 480 VAC/30 hp at 600 VAC TD 3-phase, 5 hp at 250 VDC maximum hp rating
- Brand: Eaton Cutler-HammerAmperage Rating: 30Contact Form: TPSTDimensions: 10.22 in L x 8.76 in W x 14.14 in HEnclosure Type: NEMA 4X