Eaton Cutler-Hammer DH362FGK
Eaton Custom single-throw fused safety switch, 60 A, NEMA 1, Painted steel, Class H, Fusible without neutral, Three-pole, Three-wire, 600 V, Max Hp: 20, 25/ 30, 50 hp (1/3PH @480, 600 V), #14-#2 Cu/Al
Supporting Information
- Fusible and non-fusible switches are 100% load break and 100% load make rated|The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits|Suitable for service entrance applications unless otherwise noted|Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load|Mechanically interlocked cover to prevent easy access when the switch is in the On position|Clearly visible palm fitting red handle|Premium 316 grade stainless steel enclosures offer better corrosion resistance in the presence of most chemicals, salts and acids and is more resistant to marine atmospheres|Visible double break quick make, quick break blades|Visible On/Off indications|30 to 1200 a NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole|Tri-lingual nameplates|Design for all series K heavy duty|Fusible without neutral configuration
- Fusible and non-fusible switches are 100% load break and 100% load make rated
- The continuous load current of fusible switches is not to exceed 80% of the rating of fuses employed in other than motor circuits
- Suitable for service entrance applications unless otherwise noted
- Deionizing arc chutes, arc chutes confine and suppress the arcs produced by opening contacts under load
- Mechanically interlocked cover to prevent easy access when the switch is in the On position
- Clearly visible palm fitting red handle
- Premium 316 grade stainless steel enclosures offer better corrosion resistance in the presence of most chemicals, salts and acids and is more resistant to marine atmospheres
- Visible double break quick make, quick break blades
- Visible On/Off indications
- 30 to 1200 a NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole
- Tri-lingual nameplates
- Design for all series K heavy duty
- Fusible without neutral configuration
- Brand: Eaton Cutler-HammerAmperage Rating: 60Contact Form: TPSTDimensions: 16-1/2 in L x 9-1/2 in W x 8-1/2 in HEnclosure Type: NEMA 1Finish: Painted